Auto Body Repair Process

To ensure that we can truly guarantee our work, we have developed the Redline Quality Control Program. Since 2008, this system has been in place to create a predictable repair process, save time, and to guarantee your satisfaction. Each vehicle must enter five different quality control inspection points. At this stage, a highly skilled technician performs a rigorous examination before moving to the next stage in the repair process.

Redline Quality Control Program

Through our continued research and investment in the most up to date technology, we have developed a superior repair process called the Redline Quality Control Program. All vehicles enter an inspection point before advancing to the next stage. Each stage is worked on by a specifically trained technician, which allows us to confidently guarantee the work for as long as you own your vehicle.

DAMAGE ASSESSMENT

  • First checkpoint
  • Review work order and ensure repair blue printing is in line with B Street's repair processes.
  • Review damage assessment notes and directions.
  • Ensure vehicle is not a total loss.
  • Move on to second stage.

PARTS

  • Second Checkpoint
  • Review repair plan, blueprinting, and work order.
  • Ensure no damaged parts are located on vehicle still damaged that are not marked for repair or replacement.
  • Verify no damaged parts are located on parts cart for replacement that are not ordered.
  • After complete, move on to third stage.

METAL REPAIR

  • Third checkpoint
  • Review repair plan, blueprinting, and work order.
  • Look over the vehicle to ensure no damage was missed by the first stage.
  • Ensure all blue printing is still visible on vehicle.
  • Note if vehicle needs jamming prior to fitting sheet metal (bolts on radiator supports).
  • Ensure parts cart is with vehicle.
  • Ensure all parts are in hand and in good condition.
  • After complete, move on to fourth stage.

FILL & FINISH

  • Fourth checkpoint
  • Review repair plan, blueprinting, and work order.
  • Make note of any parts needing repair.
  • Inspect all metal parts repaired, according to work order.
  • Ensure all metal work is repaired and ready to fill and finish standards.
  • Verify all seam sealer on internals of vehicles is completed.
  • Ensure all blue printing is still visible on vehicle.
  • Confirm there are no replacement parts needing to be cleaned or filled.
  • Verify that all welds are of good quality and holding securely.
  • Ensure parts cart is with vehicle.
  • After completion, move on to fifth stage.

PAINT REPAIR

  • Fifth checkpoint
  • Review repair plan blueprinting and work order.
  • Inspect for pinholes, runs, sags, or improperly primed surface.
  • Make sure the repaired surface is straight.
  • Ensure any trim interfering with the paint process is removed.
  • Verify all interior and exterior seam sealing is complete.
  • Ensure all seam sealer on internals of vehicle is complete.
  • Inspect for any loose parts.
  • Make sure all parts needing paint are prepped and ready for paint.
  • Note panels needing rock guard.
  • If two-tone is needed, establish proper paint processes to ensure there will be no hard lines.
  • Ensure parts cart is with vehicle.
  • After completion, move on to sixth stage.

REASSEMBLY

  • Sixth checkpoint
  • Review repair plan blueprinting and work order.
  • Inspect paint surface to ensure color match to adjacent panels.
  • Make sure there are no excessive dirt nibs.
  • Verify texture match.
  • See if all blends in jams have been buffed out.
  • Ensure complete paint coverage on all jams and welds and or type of corrosion protection is applied (no bare metal).
  • Ensure all parts painted off the cart are unmasked and color match is good.
  • Verify parts cart is with vehicle.
  • After completion, move on to final stage.

DETAIL

  • Final checkpoint
  • Review repair plan blueprinting and work order.
  • Inspect and approve vehicle has been assembled and fitment of parts is within tolerances.
  • Look over all hardware and proper function of each piece.
  • Inspect all interior and exterior vehicle lights.

Our Locations

5 Convenient Auto Body Repair Shops in Omaha, NE and Kansas City, KS.
24/7 Towing Service call WD Towing 402-334-1050.
B Street Collision Center has developed a unique quality inspection method for each step in our auto repair process.

WEST OMAHA

13222 F St
Omaha, NE 68137
Phone: (402) 333-9872
Click for Directions

DOWNTOWN OMAHa

2340 Paul St
Omaha, NE 68102
Phone: (402) 344-4471
Click for Directions

72ND ST

928 S 72nd St
Omaha, NE 68114
Phone: (402) 999-4787
Click for Directions

CHALCO

11123 Sapp Brothers Dr
Omaha, NE 68138
Phone: (402) 316-4647
Click for Directions

LEGENDS

2220 N 99th St
Kansas City, KS 66109
Phone: (913) 490-1004
Click for Directions

SHAWNEE MISSION

8035 Lenexa Dr
Overland Park, KS 66214
Phone: Coming Soon
Click for Directions